
The first question every homeowner asks is, "How much does Colorbond roofing cost?"
By 2025, the material cost of Colorbond roofing in Australia will range from $50 to $80 per square meter and $90 to $150 per square meter when including the cost of labor. For a standard 150 m² home, the total cost would range between $13,000 and $18,000, depending on the size, pitch, and location of your roof.
Colorbond resists heat, storms, and even salty seaside conditions. But looking at the real cost, from material expenditures to installation, can make you more ready and prevent overspending.
Let's break it down section by section so you can have a clear idea of what you'll actually be paying for your next roof work.
Colorbond roofing is rust-resistant, anti-peel, pre-painted Australian steel roof material. Made by BlueScope Steel, it's actually designed precisely for Australia's harsh climate, which has hot summers, heavy rains, and high UV.
It's available in more than 20 colors and an assortment of finishes, from matte to ultra to stainless, to suit any kind of house, ranging from beach houses to city flats.
Colorbond is most famous for having a long life span that is typically 40 to 50 years, and extremely minimal maintenance. Unlike tiling that cracks or fades, Colorbond panels are energy efficient, lightweight, and recyclable.
To the majority of homeowners, it isn't a roof; it's the knowledge of not having to repaint or replace it in a few years.
Compared to other types of roofs, the colourbond roofing cost is at the mid-to-high end, but it's also one of the most clever long-term money savers.
As of 2025, this is what you can expect:
Material only: $50–$80 per m²
With labor: $90–$150 per m²
Full installation for an average 150m² roof: $13,000–$18,000
The above prices vary depending on:
Size and slope of the roof
Site accessibility
Type of Colourbond (Standard, Ultra, or Stainless)
Additional features like insulation or guttering
If your old roof needs removal, expect an extra $1,000–$3,000. Still, considering its durability and aesthetic appeal, Colorbond roofing often gives better long-term value than cheaper materials.
Here’s a quick look at what different homes across Australia typically spend on Colorbond roofing in 2025:
|
Project Type |
Average Cost (AUD) |
|
Small home (100m² roof) |
$9,000–$12,000 |
|
Medium home (150m² roof) |
$13,000–$18,000 |
|
Large home (200m² roof) |
$18,000–$25,000 |
|
New build installation |
$90 – $150/m² (including labour) |
|
Roof replacement |
$100 – $170/m² (including labour) |
When looking for value for money for Colorbond roofing, it is a good idea to obtain a minimum of three quotes from established tradies. Prices can differ by as much as 15–20% depending on location and style of roof.
Since Australia is divided into regions where costs of labor and logistics vary, the colourbond roof cost per m² differs slightly from state to state.
|
State/Territory |
Avg. cost per m² (incl. labor) |
Notes |
|
New South Wales |
$100–$140 |
Slightly higher in Sydney |
|
Victoria |
$95–$130 |
Competitive suburban pricing |
|
Queensland |
$90–$125 |
Coastal homes prefer Ultra Range. |
|
South Australia |
$100–$135 |
Moderate labor costs |
|
Western Australia |
$105–$145 |
Higher transport cost |
|
Tasmania |
$100–$140 |
Variable due to limited supply |
|
Northern Territory |
$110–$150 |
Higher for remote installations |
In cities, rates will be higher because of labor demand and the hiring of scaffolding. Country districts can offset labor but will pay extra for transport and supply.
If you are still unsure where you are, obtain quotes locally from reputable professionals, preferably through a site such as Trusted Tradie Network, where you can easily compare confirmed tradies in your district.
To find the colourbond roof installation cost, it's useful to break it down into three components:
Includes Colorbond sheets, fasteners, flashings, insulation, and ridge capping.
Standard Colorbond: $18–$30/m²
Colorbond Ultra: $25–$40/m²
Colorbond Stainless: $40–$60/m²
Approved roofing contractors typically charge $50–$80 per hour, varying with complexity. Higher pitches, multi-level houses, or limited access points may attract extra costs.
It includes:
Demolishing old roof: $1,000–$3,000
Insulation: $1,500–$3,000
Gutters & downpipes: $1,000–$2,000
Skylights or vents: $300–$700 each
Having an itemized quote keeps you from being surprised and lets you know where the money is going.
It requires several stages to install a Colorbond roof, which requires accuracy and experience. This is what generally happens:
Inspection & Quote: A tradie comes to your location, inspects the condition of your roof, and provides an estimate.
Material Selection: You select your Colorbond profile, finish, and color.
Removal of Old Roof: Carefully removed if it's a replacement.
Frame & Preparation: Frame and battens are checked, replaced, or fixed up if necessary.
Installation: Sheets are laid down, installed, and fastened tightly with ridges and flashings.
Insulation & Finish: Thermal insulation and sealant are applied to maximize performance.
Final Check & Clean-up: Tradies check for leaks, plumbing, and cleanliness on site.
An average residential installation takes 2–5 days, subject to weather and roof size.
Colorbond roofing is not only aesthetically pleasing, but it's also a practical and durable solution for the Australian climate. Here are its advantages:
1. Durability: It resists chipping, peeling, and corrosion and lasts for up to 50 years.
2. Energy Efficiency: Its thermal coating reflects heat from the sun and offers cooling to the houses during summer.
3. Low Maintenance: You do not require regular repainting or maintenance like traditional tile roofs.
4. Lightweight: It is less stressful on your house frame, with less pressure on the walls and beams.
5. Eco-Friendly: It is constructed from recyclable steel and energy-efficient products.
6. Trendy Options: It also comes in dozens of contemporary colors and finishes to match any style.
Homeowners tend to find that though Colorbond initially costs more, upkeep and cooling bill savings make it the better long-term option.
A few Colorbond ranges suit mixed conditions. Here's the simple breakdown:
|
State/Territory |
Avg. cost per m² (incl. labor) |
Notes |
|
New South Wales |
$100–$140 |
Slightly higher in Sydney |
|
Victoria |
$95–$130 |
Competitive suburban pricing |
|
Queensland |
$90–$125 |
Coastal homes prefer the Ultra range |
|
South Australia |
$100–$135 |
Moderate labor costs |
|
Western Australia |
$105–$145 |
Higher transport cost |
|
Tasmania |
$100–$140 |
Variable due to limited supply |
|
Northern Territory |
$110–$150 |
Higher for remote installations |
When you pay thousands for roofing, the tradie's choice is as important as the material choice. Blundered installation reduces a roof's life by half.
With Trusted Tradie Network, you can:
Compare quotes from multiple licensed roofers.
See ratings and reviews before hiring.
Save time looking for reliable specialists.
Get conclusive costing and quicker turnaround.
Colorbond roofing may not be the cheapest option, but its long lifespan, low maintenance, and weather resistance make it a resounding winner in the long run.
You might pay anywhere from $90 to $150 per square meter (materials and labor), with overall project costs ranging from $9,000 to $25,000, depending on the size of your house.
For a roof that looks modern, works effectively, and adds value to your home, Colorbond is worth every penny.
An Australian Colorbond roof will cost you between $90 and $150 a square meter for materials and labor. On a regular house with a 150m² roof, you're spending between $13,000 and $18,000 in total. It may vary depending on your roof design, pitch, and Colorbond color choice.
The price of Colorbond roofing with labor is generally between $9,000 and $25,000 for the typical Australian dwelling.
The best price for Colorbond roofing in 2025 is typically between $90 and $120 per m² for quality installation and standard Colorbond materials. To make sure you’re getting a fair deal, it’s smart to compare at least three quotes from licensed tradies before deciding.
The Colourbond roof cost per m² changes a little from one state to another:
NSW & VIC: about $100–$140/m²
QLD: about $90–$125/m²
WA & SA: about $100–$145/m²
NT: generally $110–$150/m²
TAS: about $100–$140/m²
Yes. Colorbond roofing will last for decades, needs to be serviced very little, and can survive Australia's harsh weather like a champion. It also keeps your home cooler and lasts for decades.